Search for:
  • Home/
  • Cisco/
  • [Best Exam Dumps] The Best Cisco ICND1 100-105 Dumps Exam Materials Free Shared Youtube Update (Q13-Q40)

[Best Exam Dumps] The Best Cisco ICND1 100-105 Dumps Exam Materials Free Shared Youtube Update (Q13-Q40)

Get the newest helpful Cisco ICND1 100-105 dumps exam materials and vce youtube demo update free shared. Latest Cisco ICND1 100-105 dumps pdf training resources and study guides free download from lead4pass. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)” is the name of Cisco ICND1 100-105 exam dumps which covers all the knowledge points of the real Cisco exam. Download Cisco ICND1 real 100-105 dumps exam questions and verified answers. It is the best choice for you to pass Cisco 100-105 exam.

Google Drive Latest Cisco 100-105 Dumps PDF: https://drive.google.com/open?id=0B_7qiYkH83VReEJYRlhNVjdGeVU

Google Drive Latest Cisco 300-135 Dumps PDF: https://drive.google.com/open?id=0B_7qiYkH83VRS21DRS14UlZHNjg

Why Choose Lead 4pass?

High quality IT learning materials offered by the best provider lead4pass. From the following picture, you can see there is a difference between lead4pass and other brands. Other brands started earlier, but the Cisco ICND1 100-105 dumps exam questions are not the latest and it is very expensive. Lead4pass provide the cheapest and newest questions with high pass rate, pass Cisco 100-105 exam easily.
100-105 dumps

The Best Cisco ICND1 100-105 Dumps Exam Questions And Answers (Q13-Q40)

QUESTION 13
Refer to the exhibit.
100-105 dumps
A network technician is unable to ping from R1 to R2. What will help correct the problem?
A. Ensure that the serial cable is correctly plugged in to the interfaces.
B. Apply the clock rate 56000 configuration command to the serial0/1 interface of R1.
C. Configure the serial0/1 interfaces on R1 and R2 with the no shutdown command.
D. Change the address of the serial0/1 interface of R1 to 192.1.1.4.
E. Change the subnet masks of both interfaces to 255.255.255.240.
Correct Answer: A

QUESTION 14
Which command can you enter to verify that a 128-bit address is live and responding?
A. traceroute
B. telnet
C. ping
D. ping ipv6
Correct Answer: C

QUESTION 15
Which port-security feature allows a switch to learn MAC addresses dynamically and add them to the running configuration?
A. security violation restrict mode
B. switch port protection
C. sticky learning
D. security violation protect mode
Correct Answer: C

Explanation:
You can configure an interface to convert the dynamic MAC addresses tosticky secure MAC addresses and to add them to the running configuration by enabling sticky learning. To enable sticky learning, enter the switchport port-security macaddress sticky interface configuration command. When you enter this command, the interface converts all the dynamic secure MAC addresses, including those that were dynamically learned before sticky learning was enabled, to sticky secure MAC addresses.

QUESTION 16
Which transport layer protocol is best suited for the transport of VoIP data?
A. RIP
B. UDP
C. TCP
D. OSPF
E. HTTP
Correct Answer: B

QUESTION 17
CORRECT TEXT
How do you bypass password on cisco device?
A. Change the configuration register to 0x2142. With this setting when that router reboots, it bypasses the startup-config and no password is required.
Correct Answer: A

QUESTION 18
Refer to the exhibit.
100-105 dumps
What value should be displayed in Box 1 of the ipconfig output of host A?
A. 172.18.14.5
B. 172.18.14.6
C. 192.168.1.10
D. 192.168.1.11
E. 192.168.1.250
F. 192.168.1.254
Correct Answer: F

QUESTION 19
In which two ways does TCP differ from UDP? (Choose two.)
A. TCP segments are essentially datagrams.
B. TCP uses broadcast delivery.
C. TCP provides sequence numbering of packets.
D. TCP provides synchronized communication.
E. TCP provides best effort delivery.
Correct Answer: CD

Explanation:
Before two computers can communicate over TCP, they must synchronize their initial sequence numbers (ISN) TCP uses a sequence number to identify each byte of data. 100-105 dumps The sequence number identifies the order of the bytes sent from each computer so that the data can be reconstructed in order, regardless of any fragmentation, disordering, or packet loss that may occur during

QUESTION 20
What is true about ipv6 unique local addresses:
A. Global id
B. Public routable
C. Summarization
D. Unique prefix
Correct Answer: D

QUESTION 21
Scenario:
You are a junior network engineer for a financial company, and the main office network is experiencing network issues. Troubleshoot the network issues. Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
Users complain that they are unable to reach internet sites. You are troubleshooting internet connectivity problem at main office. Which statement correctly identifies the problem on Router R1?
A. Interesting traffic for NAT ACL is incorrectly configured.
B. NAT configurations on the interfaces are incorrectly configured
C. NAT translation statement incorrectly configured.
D. Only static NAT translation configured for the server, missing Dynamic NAT or Dynamic NAT overloading for internal networks.
Correct Answer: B

QUESTION 22
Which function enables an administrator to route multiple VLANs on a router?
A. IEEE 802 1X
B. HSRP
C. port channel
D. router on a stick
Correct Answer: D

QUESTION 23
Which feature automatically disables Cisco Express Forwarding when it is enabled?
A. multicast
B. IP redirects
C. RIB
D. ACL logging
Correct Answer: D

Explanation:
If you enable CiscoExpress Forwarding and then create an access list that uses the logkeyword, the packets that match the access list are not Cisco Express Forwarding switched. They are process switched. Logging disables Cisco Express Forwarding.

QUESTION 24
When troubleshooting a LAN interface operating in full duplex mode, which error condition can be immediately ruled out?
A. giants
B. no buffers
C. collisions
D. ignored
E. dribble condition
Correct Answer: C

QUESTION 25
Refer to the exhibit.
100-105 dumps
What does the address 192.168.2.167 represent?
A. the TFTP server from which the file startup-config is being transferred
B. the router from which the file startup-config is being transferred
C. the TFTP server from which the file router-confg is being transferred
D. the TFTP server to which the file router-confg is being transferred
E. the router to which the file router-confg is being transferred
F. the router to which the file startup-config is being transferred
Correct Answer: D

QUESTION 26
Scenario:
You work for a company that provides managed network services, and of your real estate clients running a small office is experiencing network issues, Troubleshoot the network issues.
Router R1 connects the main office to internet, and routers R2 and R3 are internal routers
NAT is enabled on Router R1.
The routing protocol that is enable between routers R1, R2, and R3 is RIPv2.
R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1.
Server1 and Server2 are placed in VLAN 100 and 200 respectively, and dare still running router on stick configuration with router R2.
You have console access on R1, R2, R3, and L2SW1 devices. Use only show commands to troubleshoot the issues.
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
100-105 dumps
What is the correct statement below after examining the R1 routing table?
A. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 Because the static route AD that is configured is less than the AD of RIPv2
B. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route Because the static route AD that is configured is higher than the AD of RIPv2
C. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 But the traffic is forwarded to the ISP instead of the internal network.
D. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route Because the static route AD that is configured is 255
Correct Answer: B

Explanation:
Configuration are below for the answer.
100-105 dumps
QUESTION 27
What is the maximum number of bits that can be borrowed to create subnets if a Class B network address is being used?
A. 2
B. 6
C. 8
D. 14
E. 16
Correct Answer: D

QUESTION 28
Which NTP command configures the local device as an NTP reference clock source? 100-105 dumps
A. ntp peer
B. ntp broadcast
C. ntp master
D. ntp server
Correct Answer: D

QUESTION 29
Which technique can you use to route IPv6 traffic over an IPv4 infrastructure?
A. NAT
B. 6to4 tunneling
C. L2TPv3
D. dual-stack
Correct Answer: B

QUESTION 30
When you use the ping command to send ICMP messages across a network, what’s the most common request/reply pair you’ll see? (Select one answer choice)
A. Echo request and Echo reply
B. ICMP hold and ICMP send
C. ICMP request and ICMP reply
D. Echo off and Echo on
Correct Answer: A

QUESTION 31
What happens when the cable is too long?
A. Baby Giant
B. Late collision
Correct Answer: B

QUESTION 32
The internetwork shown in the diagram is experiencing network connectivity problems.
100-105 dumps
What is the cause of the problem?
A. The cabling connecting host A to Switch3 is too long.
B. The address of host B is a broadcast address.
C. The IP address of interface Fa0/0 of Router1 is not a usable address.
D. The cable connecting Switch2 and Switch3 should be a crossover.
E. The IP address of Server 1 is in the wrong subnet.
Correct Answer: D

QUESTION 33
If NVRAM lacks boot system commands, where does the router look for the Cisco IOS by default?
A. ROM
B. RAM
C. Flash
D. bootstrap
E. startup-config
Correct Answer: C

QUESTION 34
Which statement about unicast frame forwarding on a switch is true?
A. The TCAM table stores destination MAC addresses
B. If the destination MAC address is unknown, the frame is flooded to every port that is configured in the same VLAN except on the port that it was received on.
C. The CAM table is used to determine whether traffic is permitted or denied on a switch
D. The source address is used to determine the switch port to which a frame is forwarded
Correct Answer: B

QUESTION 35
Which routing protocol has the smallest default administrative distance?
A. IBGP
B. OSPF
C. IS-IS
D. EIGRP
E. RIP
Correct Answer: D

Explanation:
Default Distance Value TableThis table lists the administrative distance default values of the protocols that Cisco supports:
Route Source
Default Distance Values
Connected interface
Static route
Enhanced Interior Gateway Routing Protocol (EIGRP) summary route External Border Gateway Protocol (BGP)
Internal EIGRP
IGRP
OSPF
Intermediate System-to-Intermediate System (IS-IS) Routing Information Protocol (RIP)
Exterior Gateway Protocol (EGP)
On Demand Routing (ODR)
External EIGRP
Internal BGP
Unknown*

QUESTION 36
Which information is used to install the best route to a destination in IP routing table?
A. the tunnel ID
B. the prefix length
C. the interface number
D. the autonomous system
Correct Answer: B

QUESTION 37
Refer to the exhibit.
100-105 dumps
All devices attached to the network are shown. Which number of collision domains are present in this network?
A. 9
B. 3
C. 6
D. 2
E. 15
Correct Answer: E

Explanation:
Both switch and router separate collision domains. In other words, each port of the switch and router creates one collision domain so we have 15 collision domains in this topology.

QUESTION 38
What is the requirement of configuring 6to4 tunnelling on two routers?
A. Both ipv6 and ipv4 must be configured
B. Only IPv6
C. Only IPv4
Correct Answer: A

QUESTION 39
Which two VLANs are reserved for system use only? (Choose two)
A. 1
B. 4095
C. 4096
D. 0
E. 1001
Correct Answer: BD

Explanation:
The VLANs 0 and 4095 are reserved by the IEEE 802.1Q standard and you cannot create, delete, or modify them so they are the correct answers.
Note:
+ VLAN 0 and 4095 are reserved for system use only. You cannot see or use these VLANs.
+ VLAN 1 and VLANs 1002-1005 are default VLANs. Default VLANs are created automatically and cannot be configured or deleted by users. + VLAN 2 to 1001 are normal VLANs. You can create, use and delete them. + VLAN 1002 to 1005 are normal VLANs too but Cisco reserved for FDDI an Token Ring.

QUESTION 40
Which subnet address is for the IP address 172.19.20.23/28?
A. 172.19.20.20
B. 172.19.20.0
C. 172.19.20.32
D. 172.19.20.15
E. 172.19.20.16
Correct Answer: E

The Following Are Some Reviews From Our Customers:

100-105 dumps
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass
100-105 dumps
The best and most updated latest Cisco ICND1 100-105 dumps exam practice files in PDF format free download from lead4pass. Useful Cisco ICND1 100-105 dumps pdf training resources which are the best for clearing 100-105 exam test, and to get certified by Cisco ICND1, download one of the many PDF readers that are available for free with high pass rate.

High quality Cisco ICND1 100-105 dumps vce youtube demo:

https://youtu.be/trVHfqmuVvg